Since circular saws are the portable version of a table saw, they are not meant to be fixed to a table. However, the portability can be a disadvantage if you are trying to make precision cuts such as miters or other angles. To help you make more accurate cuts, you can build a circular saw table in your own shop.
Step 1
5 1 2 Circular Saw
Gather your materials which include a 3/4" thick medium density overlay (MDO) in a 36"X16" sheet, a 36"X8 1/2" piece, a 36"X1" piece, and two 36"X1 1/2 " pieces, a pencil, ruler, jigsaw, eight strips of 1"X2" wood, nails, hammer, drill, 1/4" and 1/2" drill bits, screws, circular saw, 1/2" dowel, speed square, and 1/4" carriage bolt.
Step 2
Mark the midpoint 3/4" in from the edge on the long side of the 36"X16" MDO.
Step 3
Using the ruler, mark a radius from this midpoint on that front edge. Next, draw a straight line 10 inches from and parallel to the back edge.
Step 4
To cut out the table that you just marked, use the jigsaw to cut down the 10" line, around the radius, and down the 10" line on the other side. You now have the shape of the table.
Step 5
Flipping the table to its back, nail six strips of the 1"X2" wood to all of the straight edges as the support for the table.
Step 6
Go back to the original midpoint mark on the topside and drill a 1/2" hole in which the dowel will be placed to serve as the pivot for the arm.
Step 7
Down from the hole on this topside, attach two more 1"X2" strips 10 inches long to serve as the fence for the guide.
Step 8
Take the two pieces of MDO that are 36"X1 1/2" and cut a 45-degree angle off of each end. With the angles facing inward, screw these two pieces onto the ends of the 36"X8 1/2" piece of MDO. This makes the carriage with spacers.
Step 9
Screw the 36"X1 1/2" MDO to the edge of the 36"X4" MDO at a 90-degree angle to create a guide lip. Attach this assembly to the support blocks of the carriage with screws. To make the opposite side of the guide, screw the 36"X2" MDO to the other side of the carriage. The circular saw's blade should pass through the gap as it follows the guide lip, but you may need to adjust the gap width for your particular saw.
Step 10
Now, with the saw against the guide lip and the blade in the gap, fix an opposite lip to keep the saw straight as it passing through the carriage by screwing on a 36"X1" strip of MDO on the opposite side.
Step 11
Flip this carriage over and measure down 7 inches from the top edge. Mark the midpoint of the width at this point and drill a 1/2" hole for the dowel.
Step 12
Removing the upper part of the carriage, place the base under the table and tap the 1/2" dowel through both the table and carriage, not allowing the dowel to stick out past the carriage blocks. Then, reattach the upper part of the carriage.
Step 13
Slide the carriage arm as far right as possible. Putting the speed square between the arm and the fence at a 45-degree angle, drill a 1/4" hole through the upper assembly and tabletop to secure the arm with a carriage bolt. Do the same at the 90-degree and 45-degree left angle to make repeated angle cuts.
Your circular saw table is ready to use. Place the wood to be cut against the fence. Line up the arm to the angle that you want. Put the circular saw in the guide arm with a depth set so that you will only cut 1/8" into the table. Make your cut. You can now make accurate angle cuts time after time with your circular saw table.
Special Price!!! Black & Decker CS1030L 13 Amp 7-1/4-Inch Laser Circular Saw with Soft Grips
Click for larger image and other views
Black & Decker CS1030L 13 Amp 7-1/4-Inch Laser Circular Saw with Soft Grips Feature
- Comfortable to handle and hold for precise, accurate results
- On-board laser ensures straight cuts
- Powerful 13 amp motor; 5,000 RPMs; 90-degree capacity of 2-3/8-inches
- Dimensions: 15.4 x 11.8 x 8.1-inches (WxHxD); weighs 8.0-pounds; 2-year warranty
- Includes one 18-tooth carbide blade, 6.0-foot cord, and blade wrench
Black & Decker CS1030L 13 Amp 7-1/4-Inch Laser Circular Saw with Soft Grips Overview
Features: Black & Decker CS1030L 7-1/4 Laser Circular Saw 13 Amp Powerful 13A motor provides the power and torque for cross cuts and rip cuts in all woods On Board Laser for cutting accuracy Bail handle design provides versatility and control Align your blade to the kerf indicator for greater accuracy cuts Bevel adjustment adjusts from 0-45 degrees for accurate angled cuts Calibrated depth adjustment for quick, accurate cuts Piranha 18 tooth carbide blade provides fast and smooth cutting for everyday jobs Ergonomically designed main handle with soft grips for maximum comfort and control Specifications: Black & Decker CS1030L 7-1/4 Laser Circular Saw 13 Amp Amps -- 13 Amps Revolutions/Min -- 5000 rpm Capacity at 90 Degree Cut -- 2-3/8 Capacity at 45 Degree Cut -- 1-13/16 The Black & Decker CS1030L Includes: 7-1/4 18T Carbide blade 6 Ft Cord WrenchBlack & Decker CS1030L 13 Amp 7-1/4-Inch Laser Circular Saw with Soft Grips Specifications
Trying to follow that pencil mark as you cut long stock with a circular saw can be tricky. The mark might blend with the stock if it’s painted, making it difficult to see. And certainly, there’s sawdust to contend with when it comes to keeping an eye on the cut line. Anyone experiencing these troubles will appreciate the laser guide on this 7-1/4-inch circular saw from Black & Decker. The saw’s on-board laser extends a bright, visible line across the work surface, offering a perfectly straight and highly visible cut line that’s easy to follow. The saw is powered by a beefy, 13 amp motor that spins the blade at 5,000 rpm’s, providing plenty of speed and torque for cross cuts and rips through all types of wood. The saw cuts smoothly through material up to 2-3/8 inches (the tool’s capacity at 90 degrees). With an angled cut of 45 degrees, the saw cuts stock up to 1-13/16 inches thick. Bevel adjustments from 0 to 45 offer accurate angled cuts. And, a calibrated depth-adjustment fine-tunes quickly and locks solidly for cuts through materials of varying thicknesses. Best of all, ergonomically designed front- and rear-assist handles with soft grips mean comfort and control on extended jobs and help stabilize the saw for tricky vertical cuts. The purchase is covered by a two-year manufacturer warranty. --Brian D. OlsonWhat’s in the Box
18-tooth carbide blade, 6-foot cord, and blade wrench.
SAVE NOW on the special offers below!
Available In Stock. |
| This Black & Decker CS1030L 13 Amp 7-1/4-Inch Laser Circular Saw with Soft Grips ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
